HOME >> Industrial Light Source Equipment >> Curing System by Ultraviolet-Ray FEATURES By use of the light guide with the quartz sensor fiber, feed-back control and monitoring of UV irradiation intensity is possible. Also setting of UV intensity and meaurement by personal computer is possible. The one-touch mounting type lamp dose not require troublesome light axis alignment. Lamp replacement time is extremely short. Abundant remote control functions for fully auto-matic operation are standard. SPECIFICATIONS UV INTENSITY *1 more than 4000mW/cm² LAMP one-touch mounting high stability 200W mercury xenon lamp LAMP LIFE *2 average 4000hours RATED INPUT · POWER CONSUMPTION *3 AC100/200V50/60Hz1340W WEIGHT apprx.15kg *1 Value measured at 10mm from the light emitting end of the light guide unit(5-1B1000L) (center wave length=365nm) *2 Accumulated running hours when lamp light output is decreased to 50% of initial value. *3 200V input voltage type must be specified with order. Copyright (C) SAN-EI ELECTRIC CO.,LTD.